AC Infinity 4.0 Twenty20Mendo Autowhip

Lovely my friend :orange_heart: :fire::heart_eyes:

1 Like

I would suspect that your problem is with the AI part. I looked at it quite thoroughly when they first announced it. I could not see any advantage over the 69 Pro with the way I run my tents.

I let my AC and my AC Infinity Humidifier control the parameters in the lung room and the exhaust fan in the each tent fine tunes it. No AI needed. There is always exhaust flow out of the tent with it being set at 1 or 2 and it only ramps up if temperature and humidity parameters are exceeded.

With the AI, there are so many options, I think there could be conflicts to easily rise up.

I know you can’t run your particular set in the same fashion I do, but with that controller do you have to use the AI functions?

4 Likes

Girls look good man!

2 Likes

No I set it manually and don’t use the ai functions. I liked it for the WiFi more than anything and being able to manage it remotely.

3 Likes

I love my Vivosun products, but AC infinity definitely has a leg up when it comes to that soil moisture probe.

And if I had had the money for the more premium products, I probably would’ve gone with AC Infiniti from the start.

It’s unfortunate that Vivosun does not make a comparable product so if I want to monitor the moisture content of my pots, I have to get a separate AC Infiniti controller to run that soil humidity probe.

4 Likes

I’m just going to pick up my pot and judge my weight for now :sweat_smile:

4 Likes

Well that’s not good! Did you ever figure it out?

2 Likes

Factory reset on the HVAC seemed to fix it.

3 Likes

ecowit has a probe too

2 Likes

Day 52

Got home finally and checked the tent out.. these babies are nice and chunky. The two back ones are ahead of the two front ones. Fading like they should.

Hit them with some more roots terp tea top dressing and bumped the dli up a hair. Loading up the co2 tank with citric acid and sodium bicarbonate for the final 3-4 weeks.

broke the garden wire connecting the right rear corner light hanger to the ceiling support so I had to do a quick repair with some copper wire.

Time to order a :pizza: for dinner.

6 Likes

Day 54 Fuel, hints of old berries and musty wine just like the strain info says

7 Likes

Great thread and awesome plants man! Late to the party bcuz I missed it somehow but happy to be here

4 Likes

Thanks buddy!

One thing I found out about this strain it doesn’t like intense lighting levels. I’ve been running at 50% power.

3 Likes

Same with my current grow! Just the other day I went to 80% and raised light on cue with schedule but plants immediately cussed me out with their bright yellow tips lmao so I went back to 60% and lowered it back down

2 Likes

It’s the first time I’ve had to do this so I found it interesting. I’m assuming it’s strain specific and haven’t really paid attention to it until Mo pointed it out.

2 Likes

Same here man, first time it’s happened but also first time growing these beans

1 Like

New observation on the Terraform 8

The condensation tank is rather small and filled up and shutdown the unit. I got a little banner message on the app screen telling me but it was really small. This could’ve been a problem in a critical time like high heat or really cold.

So what I did was, I unplugged the power, unplugged the UIS cable disconnected the ducting and then just rolled it out to the edge of the garage on the driveway and pulled the drain plug and let it drain out there.

five minute process which was very easy due to the design of the ducting housing being able to be disconnected and detached from the unit.

The unit does come with the drain pipe to attach to it for this so if you had a place to drain it off too would be good. Doesn’t work for my garage application.

So I’ll probably have to add this to my processes you know like every two weeks to drain this thing especially when going on vacation and leaving it.

2 Likes

Heard back from the ACI guys, I guess they were seeing some issues with the Terraform’s and put out an update to the firmware which I immediately installed.

The firmware update that we pushed out was to fix a few bugs, as well as fix the unit freezing when it should be turned on/off by the controller. Since this update has been pushed, we have not seen these cases appear, but if you continue to have issues, please let us know so we can look into the issue further.

1 Like

Day 62 Fading out nicely. Gave them a little extra juice for the last mile this week. But very happy with their progress.

6 Likes

Looking extra stank ass :laughing: Lovely :ok_hand: :heart_eyes:

1 Like